From your basic RING GASKET with an Inner Dimension and Outer Dimension, to the most complex parts with numerous cutouts and boltholes… you provide the drawing, we can make the gasket. The most important feature of the gasket is the high unit load generated by the narrow sealing area provides a considerably higher flange clamping pressure and a better seal at a lower clamping force. The standard gasket material is 304 SS, with two (2) tracks of Flexible Graphite sealing elements. Specialty gasket material and/or sealing elements are available as options.
Ability to cope against severe thermal cycling and vibration.
Inherent Live Loading capability.
Fire, Blow Out, & Leak proof.
Superior pressure handling.
Cannot be over compressed.
No need to re-torque.
True compression seal.
Eliminates fugitive emissions.
Sizes: Per your specifications.
Thickness: recommend 1/16" (1.6mm). Thicker or Thinner gaskets are possible.
Torque Values: 50% to 65% of Bolt Yield Flange
Surface Finish: 10 to 400 µin RMS (microinches)
Sealing Elements Width: ≥1½ (gasket size) 0.125" each side.
Sealing Elements Width: ½ to 1¼ (gasket size) 0.100" each side.
Minimal Sealing Element Web Width: 0.375"
"M" and "Y" values: m = 2.85, Y = 2900 psi Leak Rate: 0.005 in mg/m ∙ s (DIN 28090 / 1..2) < 10ppm @ He
Temperature Range: -200°C cryogenic air +500°C in regular atmosphere +650°C in steam +1000°C reducing or inert media
Pressure Range: Full vacuum to +5000 psi
Minimum Seating Stress: 2900 psi (20 MPa)
Maximum Seating Stress: 23,200 psi (160 MPa) (testing equipment limit)
Recommended Seating Stress: 5800 to 8700 psi (40 to 60 MPa)
Standards Available: ANSI 16.5, DIN 2600, JIS B2220, BS 4505, BS 10, AUS 2129
METAL CARRIER OPTIONS
AL6XN® (Stainless Steel)
304 Stainless Steel
316 Stainless Steel
321 Stainless Steel
347 Stainless Steel
SEALING ELEMENT OPTIONS